Tree Surgeons in Andover, Hampshire

Local family run tree care company, who care about the trees Nash & Sons Forestry since the 1940's We pride ourselves with professional work and advice with any problem that has come to the clients attention. We like to travel, so contact us through our website and we will get back to you. As you have seen through our images, details about each variation of arboriculutral services will be listed below. Crown thin - is the thinning of the crown to allow light through the tree, which will also remove weight on larger limbs. Crown clean - is the removal of all dead/dying wood and rubbing branches which will progress into branch or tree failure over time, by doing this it will prolong the life of the tree longer. Crown reduction/pruning - is to reduce the crown by a selected amount of metres, in a correct pruning method, this will leave the tree smaller, letting the light around it and leaving it a good shape. Crown raise - is the removal of the lower branches over hanging gardens, roads, footpaths, etc to a selected height. Branch/limb removal - is the removal of selected branches. Tree removal - is the take down of the selected tree(s) by section-ally felling it, which will be done by the use of rigging which will allow large or small amounts of brush or timber on ropes slowly over or around obstacles. Tree felling - is the same as above but can be done from felling the tree from the ground. Stump removal - is done by a machine and completely removed. Free on site survey and quotation. All of our work is left tidy and clean as to which it was before we arrived, all unwanted chippings or timber will be removed and recycled correctly.

The LOLER regulations came into force on the 5th of December 1998 and apply to all equipment used in Lifting Operations. In arboriculture this means climbing equipment, lowering equipment, and lifting platforms. Essentially the regulations require equipment lifting people (i.e. ropes, harness, karabiners etc., and Cherry pickers - MEWPs - mobile elevated work platforms) to be thoroughly inspected by a competent person at six monthly intervals, and lowering equipment to be similarly inspected at twelve monthly intervals. Most importantly, LOLER requires accurate records to be kept itemising every component and identifying it with a unique mark.